The turntable is a vintage record player that used for playing audio recordings in the purest form. It has a circular and rotating platform that plays a vinyl record to create a sound so it is obvious that one will feel grounding issues at some point in time. If you are facing a similar type of problem, then this post is necessary to read. Here, we will address this issue in deep so you understand how to solve it.
The issues related to grounding can cause lots of distortion and annoy the person while listening to music. It is generally caused by a ground loop that created when the chassis connections of various parts in the turntable are on different ground. To avoid such issues, there is a requirement for grounding the amplifier corrector. It will make sure that the noise eliminated from the system and best sound can be produced.
Why are ground wires important in a turntable?
You need to understand that the ground wires are an essential part of a turntable system. It assists in preventing the unpleasant distortion, hum, or any type of buzzing while playing the audio system. All the turntables don’t need a ground wire. However, you shouldn’t assume that your system doesn’t require one without checking it.
To find out, please check out the ground screw on the turntable as it is the most common place for attaching the ground wire. The other end of this screw will be connected with a ground lug on the amplifier. We believe now you can easily find out whether your turntable has ground wire or not.
What is the process to ground a turntable?
There is a need to take proper steps for eliminating this issue from the system. Let us explain to you about the process to fix a grounding issue in a turntable.
First of all, you have to turn the amplifier and turntable off. Never start the process on a running system as it can damage the system. It not only prevents the loud or damaging sound in the system but also assists in minimizing the chances of an electric shock.
In this step, you have to find out the grounding wire in the turntable. As we have told you that it will be located on the ground screw or under the metal turntable chassis. The majority of the system comes with the grounding wires of green color. However, there are still chances that the ground wire on your turntable may be of a different color.
If you are looking to ground a turntable that is in a completely new condition, then there is a full possibility that it may be under the chassis and wrapped. Here, you have first to unwrap it.
After unwrapping the wire, you have to identify the grounding terminal that usually situated on the receiver or amplifier. In the majority of cases, this terminal is located on the back side, and you will easily find it with ground mark.
It can be made of metal having a knurled shaft, whereas there is a pretty simple screw terminal in some systems. Once you find the ground terminal, we suggest you lose it.
Please check and ensure that the length of the grounding wire should be adequate enough to reach the grounding terminal in the amplifier. There are many instances where people have to get frustrated due to the short length. So, have a look at it in advance to avoid such a problem.
If the wire is short by any chance, then we suggest you move the equipment so that the distance between turntable and amplifier can be reduced.
The ground wire spade connector needs to move onto the grounding terminal in this step. You can easily tighten the connection with a little bit of force. However, it shouldn’t be over-tighten to avoid damage to the terminals.
Now, it is time for switching the amplifier and turntable on. That’s all, the process is completed, and the audio system is ready to use. You have successfully grounded your turntable.
What are some important tips for maintaining the health of your turntable?
Our team wants to tell you about some essential things through which you can maintain your turntable perfectly. Have a look at each of them below:
Cleaning it consistently
Wiping down the turntable on a consistent basis will ensure that it remains free from dust and other harmful particles. You can use the cleaners available in the market or create your own. No matter which option you choose, it is important to clean it regularly.
Keep the stylus clean
The majority of people keep their turntable in a wonderful condition, but they never put any effort into the stylus. It is important to keep it clean as the stylus is essential for making adjustments in the sound quality. The stylus can be cleaned with a soft brush for eliminating debris and dust from it.
Belt drive replacement
A belt drive is one of the major components in the turntable that get a huge pressure while playing. So, we suggest replacing the belt drive after a couple of years. It will allow the turntable to perform at its best.
Never keep your turntable in the place where direct sunlight emits. Also, try to avoid playing it when there is a huge humidity in the weather.
Grounding your turntable is an important thing that you need to perform consistently. If you perform it regularly, then there is a superb possibility that this issue will get eliminated. We suggest you read the process carefully so that nothing gets mistaken. If there is still an issue in your mind about this procedure, then please tell us in the comment section. Our team stays active and consistently replied to the queries of the readers for helping them perfectly.