If you are a real vinyl music lover, then there is a full chance that you must understand the importance of extra accessories that can assist in boosting the sound. One of the major ones is the best record clamp that can be very useful for such a purpose. They held the record to the damping material and improve the quality of sound brilliantly. There is an advanced mechanism used by this accessory so the record plays perfectly as your needs. However, the problem is the majority of people don’t even know what this equipment is?
If you are one of them, then there is nothing to worry as we will help you in this perceptive properly. We suggest you reading till the end so that you don’t miss anything. In case you need a turntable mat read our record mat buying guide.
What is a record clamp & why you need to buy it?
A record clamp can be defined as a turntable accessory that you can use for making the vinyl sound better. It can fit in three different ways, named collect, threaded, and unthreaded. You can use any of them according to your needs as all of them are equally effective. They are located on the record’s top while playing & assists in pushing it downwards so that all unwanted wobble can be eliminated.
That’s not all, the bass from subwoofer don’t get affected when a record clamp is placed. We may say that it isn’t the cheapest accessory available in the market, but the solid sonic improvements offered to make it a worthy investment. Now, let’s check out the major advantages provided by a record clamp mentioned below:
- As we all know that the records vibrate when the music played that can affect the sonic. However, the presence of a record clamp can couple the record tightly so that sonic get a boost instead. You will find a considerable boost in the quality for sure.
- The extra vibration & damping caused in the operation can be minimized using a record clamp.
- This record clamp holds down the vacuum while playing the music.
What are the top 10 best record clamps in 2020?
The market is full of record clamps so the beginner can get confused and may even fall in the trap of a company. To make sure you do not end up making a bad choice, we have made solid research & testing. We have checked almost 18 units to create the list of best record clamps in 2020. You just check all of them and buy one that fit your needs perfectly.
1. Record Doctor Record Clamp (editor’s choice)
Buying this excellent record clamp will ensure that you don’t have to deal with slippage issues any longer. It is exceptionally designed record clamp manufactured by Record Doctor that make sure your vinyl stay at the platter so that the overall performance gets a boost.
There will be a great reduction in unwanted resonances that will result in making the sound better. Furthermore, you will see a great improvement in the slippage issues after installing this clamp.
That’s not all; it also assists in reducing the stylus & record wear giving it a long life. If you choose to buy this unit, then we can ensure that you will end up extended performance for many years to come. It fits with almost all the turntables quite comfortably.
- Keep the records tightly in position
- Compatible with most of the well-known models
- Boost the sound quality
- Some call it a little bit extra tall
2. Pro-Jet Clamp It Record Clamp (best for quick mounting)
The buyers looking for a unit that can be installed quickly and give a boost to the sound should go for this model. It is a tremendous unit manufactured by a brand like Pro-Ject who has a very positive reputation in the vinyl world. All the unwanted resonances that occur during the playback will be minimized with this one.
The biggest feature is quick & easy mounting that everyone looks in a unit. There will be no long connection with the outer edges to the platter that can boost the sound. In addition to making the sound better, this vinyl clamp also looks cool on the record player.
The weight of this clamp is only 5 pounds, so there is nothing to worry about putting too much pressure on the turntable. Overall, this excellent unit is an excellent record clamp to buy for having a wonderful experience.
- Reduces unwanted resonances to a greater extent
- Fitting process takes less than a minute
- Pretty amazing look
- Little bit bulky unit
- Costly to buy
3. RonXer Vinyl Turntable Clamp (best budget-friendly record clamp)
The readers who want to buy an excellent product at an affordable budget can think about buying this excellent clamp. With a weight of less than 1 pound, it creates the perfect pressure for reducing the vibrations.
On top of that, the cotton felt bottom in this unit ensures that the records stay safe & weight gets distributed perfectly in the center. One amazing thing about this clamp is that it can fit even under the dust cover thanks to its shorter size.
The company delivers it with a perfect paper box that makes this one a perfect gift for any occasion. Together with a budget-friendly price, this product can turn out to be a perfect investment for your turntable.
- Distribute weight adequately
- Provide complete protection to a record label
- Available at an affordable price
- None at all
4. Signstek Disc Record Clamp Damper (best under $30)
The fourth product in our list is this best record clamp manufactured by a brand like Signstek who doesn’t need any introduction. Apart from reducing noise significantly, this clamp can assist in providing a realistic sound reproduction.
This unit is known to offer pure signal retrieval while playing records on the turntable. Furthermore, a solid improvement in the stereo image can be acknowledged after installing this unit.
Overall, we can say that it is an excellent product that you can make at a very affordable price. The chances of getting disappointed with its experience are quite minimal.
- Minimizes the noise floor greatly
- Give a boost to the stereo image
- Can be shopped affordably
- Tightening this unit is a little bit difficult task
5. Viborg Turntable Vinyl Clamp (best under $20)
If you have a super-low budget and still want to end up making an excellent choice, then buy this HiFi vinyl clamp without researching further. It is a solid unit manufactured using top-grade aluminum alloy material.
This excellent product can eliminate the vibration significantly and boosts the sound to a greater level. That’s not all; it also improves vinyl’s speed & timing instantly.
It is a high-quality record clamp that comes with a soft base pad for proper protection to the label. Overall, this unit is perfect for maintaining stability & making the sound better.
- Make piano notes super clear
- Boosts stability
- Completely non-magnetic alloy weight
- Lack of bubble in the middle
- Clearance needs to be measured
6. Viborg Black Record Weight
The next in our list is this solid unit that can eliminate all the extra noise with its bubble level & solid dampening surface. You can maintain the record flush with this unit quite adequately.
You call it a complete package that can complete the job sufficiently. It is an exciting turntable weight stabilizer that comes with a super-attractive black finish that will improve the looks of your record player.
The biggest quality of records clamps manufactured by Viborg brand is that you don’t have to spend too much money. This product isn’t an exception, and you can enjoy a wonderful experience by buying it.
- Provide full protection to the record player
- Available at a decent price range
- Make acoustic sound better
- Not so good design
- Some complain that its bubble is inaccurate
7. Nobsound Aluminum Record Weight
During the testing process, we find that this unit can make the sound vibrant & alive with its weight. It is available in three different colors so that one can easily find one that matches their turntable.
The Nobsound brand has manufactured it in a nonslip design to provide stability. Also, the availability of a soft base pad ensures the records stay fully protected.
Additionally, there is a pretty solid non-magnetic aluminum alloy used for creating it, so there is nothing to worry about the authenticity of this unit.
- Available in three solid colors
- Add vibrancy in sound
- Crafted in a nonslip design
- Lack of pad on the bottom
8. DJ Gearix Record Weight Stabilizer (best for durability)
This silver aluminum record clamp is a highly durable unit that can last for many years to come. The DJ Gearix has crafted it in such a way that a considerable improvement in sound can be witnessed.
It is a middle-range priced record clamp that minimizes the resonance & gives a great boost to the sound quality. The music lovers can enjoy a solid experience with this product.
The weight of this unit is 430 grams, and there is also a felt on the below part for providing adequate protection to the records.
- Reduces vibration greatly
- Quite easy to use
- Provide adequate pressure
- Not compatible with all types of tonearms so please check before buying
9. Big Ben LP Record Weight Stabilizer
Available in two different colors, this Big Ben record clamp is designed ergonomically for giving better handling & fabrication. On top of that, the company has provided a pretty exquisite finish to this unit
It is compatible with all types of turntables, irrespective of design & weight. You will get this one in a package that even includes a leather bottom pad for better protection to LP covers.
Another good thing about this unit is that it comes with a 100% satisfaction guarantee, so there is nothing to worry about the quality.
- Offer accident-free handling
- Give pretty exquisite finish
- Compatible with all types of turntables
- Wide size may be an issue for some buyers
10. Pro-Ject Record Puck Record Clamp
Our list will end with a pretty large record clamp that has a diameter of 3” and a height of 1”. It has a metal construction & manufactured by the Pro-Ject brand.
This one is quite an expensive unit, but the quality & features justify its price tag. There is a felt added on the bottom so that the protection to a record label can be provided.
Furthermore, it can fit with all the turntables as long as there is no threaded spindle.
- Solid metal construction
- Extremely beautiful look
- Felt for superb protection to recording label
- Very expensive to buy
How to choose the record clamp?
Always check the following things if you want to end up buying the best record clamp:
It should have a weight that put adequate pressure on the turntable without causing any damage to its parts.
They can be bought anywhere between US$ 10 & US$ 200. However, you should go for one that suits needs as overspending will never be a good idea.
Always buy a record clamp that comes with a solid finish to make sure it never damage the record labels.
Don’t forget checking the compatibility of record clamp with your turntable as each one doesn’t fit with all the models.
We believe that now you understand the importance of buying a record clamp. There are tons of models in the market, but we have made things quite easier for you. Buy the best record clamp from this list to give a great boost to the sound and enjoy an excellent experience. If you have a query regarding record clamps in your mind, then tell us below.