Are you experiencing crackling and static sound in your music system? If yes, then we understand your condition as it is very irritating to receive annoying sound instead of crystal clear sound. No matter, you want to hear rock or pop music, there is nothing more irritating than a static sound.
Static is a sound interruption that results while the signal transmitted into the speaker has much more signals than the original requirement. In this post, we will tell you the major reasons for static and how you can deal with it. We strongly suggest you each of them carefully so that you get the ideal results. Looking for Bluetooth boombox buying guide check this out.
What are the major reasons for static in speakers and how to get rid of it?
This condition arises when electric current more than its capacity picked by the speakers. It can result from plenty of factors that we have mentioned in detail below:
There is electromagnet used by the speakers for developing sound using the electrical signal that passes from them. However, they pick up signals from other devices located near the house in some scenarios and causes static in sound. There are plenty of devices that develop electromagnetic radiation, including televisions, Wi-Fi routers, radios, microwaves, and many more.
For eliminating this problem, we have to make sure that the system doesn’t pick up the electronic signals transmitted by the products surrounding it. It can be done easily by moving the speaker away from the equipment. Also, you can think about using shielded cables or shielded speakers that can eliminate the static in sound at a very quick pace.
There are many instances where the sound picked by the ground wires gets heard in the music system. We suggest you check all the ground wires connected to the speakers, including an external amplifier, head unit, and all the related components. The chances of having static in sound due to this reason are quite minimal, but still, it is better to have a check on the ground wires.
If you want to get rid of static due to this problem, then we suggest you about making the ground wires as short as possible as having ones with longer length can pick up a noise that we usually hear in the speaker. On top of that, you need to ensure that splice in the extended ground wire connected firmly. Also, using a thicker gauge ground wire will be a good idea.
As we have already explained, a speaker is only capable of handling a limited quantity of signal, and there is a complete chance of static if it starts receiving more than the requirement. In this scenario, the speaker tries to tackle the extra power and flatten the sound from the top. It causes distortion in the sound output that can be noticed at the maximum volume.
If you experience this kind of problem on a continuous basis, then the common solution is turning down the speakers until the distortion gets vanished. If the problem still doesn’t go away, then you have to check the amplifier and turning down its volume. If distortion gets minimized at a lower volume, then there is a chance that amplifier is producing an extra sound that speakers aren’t capable of managing. Also, you need to make a perfect match between amp and speaker for eliminating static.
Static in radio sound
Do you often experience static in the sound while playing the radio? If yes, then there is a strong chance that it is coming from the antenna. There is pretty annoying static produced due to antenna problems while listening FM, satellite or AM radio. No need to get crumbled if you are dealing with this condition.
There are plenty of different ways to get rid of this problem, but we will tell you about the best one. You can remove the antenna wire from the system and check out the quality of sound again. If you find that static has gone from the sound, then it is ideal to install a noise suppressor. It will plug between the antenna and the receiver for getting perfect results.
Damaged in the speakers
The sound in the speaker is amplified using flexible material in the form of a cone that attached to the base. It assists in pumping the sound waves through the ears. The damage in the speaker can create static in the sound that no one wants to hear.
For checking them, you have to go check out the speaker’s back portion and find the cables there. You have to make sure that they are placed correctly. Also, they shouldn’t be bent or pulled from the slot. If everything is normal, then you need to play a song and move the cords to see if any difference gets recognized. If you still feel static in the sound, then it ensured that the problem isn’t in the cord. There is a chance that the problem might be due to a damaged cone.
You can recognize that the vibration won’t perform correctly if the corn is torn or loose. The signal passes from a damaged cone can result in vibration and causes static in sound. In that case, there is nothing better option than changing the speaker, or you can choose to repair from a professional technician. Don’t know which vintage speaker you should have check this out.
As we have already explained, the static while listening to the favorite music can irritate a lot and ruin the experience to a greater extent. Furthermore, it is pretty tougher to solve this problem, and that’s why it is important that you take the necessary steps. You can identify the root cause by following things mentioned in this article carefully. If you have a question or suggestion regarding this post, then we invite you to a discussion in the comment section. Our expert team will help you in the best possible manner with their useful advice.